Tuesday, September 29, 2015

https://www.esurance.com: Does Home Owners Insurance cover Mold?

In the article below describes Does Home Owners Insurance cover Mold? The article will tell what situations are covered during water damage and the source of the water damage. Here is a link to the exact article:https://www.esurance.com/info/homeowners/are-water-and-mold-damage-covered

what’s covered: water damage vs. flooding

When our homes start filling with water, most of us are more concerned with getting rid of the moisture — quickly! — than with tracking where it came from. Insurance-wise, however, the source of your unwanted lagoon is pretty crucial. The big distinction you have to make is between flooding and water damage.

What’s considered a flood?

A flood typically involves external water rising onto your land, such as you might get from an overflowing river, tsunami, mudslide — even heavy rains. Damage caused by flooding is generally not covered by your home insurance policy; you need separate flood insurance coverage.

What’s considered water damage?

Water damage, on the other hand, involves instances of water hitting your home before touching the outside ground — and is usually covered by homeowners insurance. Depending on your home policy, things like a roof leak, busted pipe, or faulty sump pump could all qualify.

Remember, because the distinction between flooding and water damage is so fine, it’s always best to talk with your insurer after any incident. Even if your claim is flood-based and the immediate damage isn’t covered, perils extending from the flood — like property theft or fire — might be.

homeowners insurance and mold

One of the worst byproducts of water damage can be mold. Besides being potentially hazardous for your health and just plain gross, mold can reduce your home’s value by discoloring the walls or ceiling, rotting wood or ductwork, or creating a foul odor. Ultimately, a happy home is a dry home.

Whether homeowners insurance covers mold, again, comes down to the source. For instance, mold caused by flooding or long-term neglect probably won’t be covered. But if the mold is a result of a burst pipe or other covered peril, your home insurance coverage might be able to help repair damage and get rid of the pesky spores.

dealing with mold

Luckily, you needn’t rely only on your insurance. There are plenty of ways to prevent mold growth on your own.

How to prevent mold

According to the Environmental Protection Agency, mold spores flat out cannot grow without moisture. Here are some mold prevention tips to keep your pad dry and fungus at bay:

  • Dry any spills or leaks within 48 hours
  • Clean gutters frequently
  • Keep indoor humidity below 60 percent (if you use a humidifier)
  • Activate bathroom vent or open a window while showering
  • Vent appliances that produce moisture (stove, dryer, etc.) and use fans when necessary
  • Insulate cold surfaces
  • Avoid wall-to-wall carpeting if possible
  • Don’t store paper products or clothing in humid areas
  • Clean fridge drip pans regularly
  • Ensure rainwater flows away from the house

How to spot mold

Sometimes even if mildew has entered your home, it’s not obvious. Here are a few tricks on how to spot mold:

  • Check for an earthy or musty odor
  • Angle a flashlight at the wall to reveal color contrast
  • Look behind shelves and dressers, or anywhere the air is cold and not ventilated
  • Pat pillows with a spatula to see what dust comes up
  • Check surfaces for a slick or slimy feel

How to safely remove mold

Keep in mind that for areas 10 square feet or larger, it’s usually best to call an industrial hygienist. But if you do find mold in your home, follow these guidelines when getting rid of it:

  • Wear long sleeves, goggles, and rubber gloves
  • Use a respirator
  • Ventilate the room while cleaning
  • Separate infested area from the rest of house with plastic sheets
  • Place used cleaning items in airtight plastic bag

So do not hesitate to contact us for great insurance carriers or mold removal in Baltimore. We can be reached at 443-961-2725


The post https://www.esurance.com: Does Home Owners Insurance cover Mold? appeared first on mold.

from mold http://moldremediationdr.com/does-home-owners-insurance-cover-mold/
Mold Remediation Baltimore

Sunday, September 27, 2015

Mold Removal Baltimore

Remediation Pro’s are Certified mold removal Baltimore specialists as we tend to solely use the most effective equipment within the mold removal business. We provide mold inspection and testing at a affordable cost. We provide a guarantee against come any mold growth that we treat and also the warranty is totally TRANSFERRABLE to any house owner. Contact us as a mold removal specialist will provide you with a custom plan to take away the mold from your home or business. Call us now at: 443-961-2725

Friday, September 25, 2015

Black Mold Remediation Costs in Baltimore

Here is a article on a general idea of what Black Mold Remediation Costs in Baltimore and surrounding areas. The cost could be a lot less depending on what needs to be done. The article in reference is from: http://www.essortment.com/cost-black-mold-removal-professional-46782.html

What is the cost of black mold removal by a professional? Kevin Bristol, owner of Advanced Mold, gives readers an idea of what to expect from a professional mold removal. If you have toxic black mold or…


If you have toxic black mold or stachybotrys in your home you will need to have it removed by a mold remediation specialist. There are many costs involved in treating toxic black mold including treating the actual mold, the health costs, moving out of your home during treatment, and also the cost of loss of value in your home. This article will go over some of the costs of toxic black mold.
According to the Toxic Black Mold Information Center, “once mold infests the home, it s very expensive to clean up. To make matters worse, many home insurance companies are denying mold claims”. The actual average cost you will pay to a mold remediation specialist, “for one wall that is contaminated, is about $3,000.00” states Kevin Bristol President of Advance Mold Remediation. Kevin is also certified by the National Association of Mold professionals, International Association for Mold professionals, and the Environmental Protection Agency. This cost will include a mold inspection by a professional, mold sampling sent into an independent lab to determine what type of mold you have, and removal and cleanup. This cost also includes, “all of the helmets or protective wear that the technicians wear, the machines that they use which are called negative air machines that filter out the dirty air, and all of the chemicals, as well as the encapsulation coating” says Bristol. There is a lot of prep work in preparing a site to have toxic black mold removed since you need to isolate that part of the house from other rooms. Sealing off the air ducts and doors is important in order to keep the mold spores from floating into other rooms of the house. The family will most likely need to move out of their home during this time and this will be an additional cost.
Mold can cause mild to severe health problems in individuals exposed to it. Toxic black mold, which is the most widely publicized, can cause severe health problems such as lung disease, learning disabilities and chronic fatigue syndrome. The cost of these health problems will vary depending on the situation. Some of the health problems will be reversed once the individual moves out of the home that is infected. Toxic black mold can be recognized by its dark black slimy appearance. You may see dark splotches in your wall board, ceiling tiles or under your linoleum. You may not see any indication of toxic black mold if it is in your attic or in between your walls. Toxic black mold needs extremely wet conditions to grow. If you have had a flood or a long term leak that went undetected you can grow toxic black mold.

The loss of value in your home if it has toxic black mold is determined by the extent of the mold. There have been homes where the mold was so wide spread the entire home had to be destroyed and rebuilt. In most cases however, the mold can be removed by just removing one wall or floor and replaced with new. Check your home disaster insurance policy to see if they cover mold infestation. If the mold is able to be cleaned up you may be fine. However, in some states, you will need to disclose on the sale of the home that it had toxic black mold at one time.

Please contact us  at 443-961-2725 to talk about a customized plan for your black mold remediation in Baltimore and surrounding areas.

The post Black Mold Remediation Costs in Baltimore appeared first on mold.

from mold http://moldremediationdr.com/mold-remediation-costs-in-baltimore/
Mold Remediation Baltimore

Thursday, September 24, 2015

http://www.essortment.com-How to Remove Mold From Carpet

Here are some great tips from the Essortment.com website on how to remove mold from your carpet. You can find the article listed below and here is the exact link on there recommendations that we highly recommend:http://www.essortment.com/remove-mold-carpet-46825.html

Indoor mold can make life in our homes very dangerous. Here are some cleaning tips for getting mold out of carpet.

Mold is a fungus that occurs naturally in the environment. It eats and grows in damp or moist areas. It feeds on decaying matter such as dead leaves or trees on the forest floor. Mold can digest what it grows on and can do some serious damage in our homes. It can eat into paper, cloth, carpet, rugs, and even our walls and ceilings. Mold in nature can be very beneficial, but indoor mold can make life in our homes very dangerous.Some names of common indoor molds include peniccillium, cladosporium, mucor, alternaria, and aspergillus. These common indoor molds can come in many different colors: black, red, orange, white, yellow, blue, brown, or violet. They can grow year-round and live in warm and humid conditions. Mold can appear in patches or a speckled-type of growth. The area where the mold is growing will also have a musty smell.

The dangers of mold contact are many. If mold is touched or inhaled, it can cause symptoms like wheezing, stuffy nose, eye or throat irritation, severe allergic reactions, and even serious lung problems.

There are many ways in which to prevent mold growth in the first place. Reduce the humidity in your home to between 30 and 60 percent. Use a dehumidifier if you have to. Never install carpeting in areas where there is always a moisture problem, such as in bathrooms. When cleaning your carpet with a machine that uses water always be sure that the area is thoroughly dried or this can cause mold growth. If there is flooding or a water spill, the area must be dried within 24 to 48 hours to prevent mold growth. Mold causes more damage the longer it is allowed to sit so clean these areas as soon as possible.

Whenever dealing with mold and mildew, always wear protective gear. Never touch mold or moldy items with your bare hands. Wear gloves that extend to the middle of the forearm. Goggles, without ventilation holes, are a must to keep mold and mold spores from getting into your eyes.

The first step in cleaning up moldy situations is to find the source of excess water and moisture. Look for any roof or plumbing leaks or flood damage that still needs to be cleaned up or fixed. Be sure to check the air ducts in your home. Heating/ventilation/air conditioning systems can spread mold throughout the rest of the house. This step must be completed before any cleaning will have any effect.

The second step is to determine if the area of mold growth is small enough that you can take care of it yourself or if you should hire a professional. If the area of mold growth is more than 1 to 10 square feet, you should definitely hire a professional. When looking for a specialist in carpet and rug cleaning, make sure that they are specially trained in dealing with mold problems.

The third step, if attempting cleaning on your own, is to begin the cleaning process. If the area is a very small area, you can try cleaning the carpet with a simple solution of detergent and water in a steam-cleaning machine. Wet the surface and suck up the water, repeat until the water starts coming out clear. If detergent and water doesn’t work try some original liquid Lysol and water. Use Lysol only if it doesn’t trigger your allergies.

Another method to try is quite a bit more dramatic. You can use a sanitizing agent such as hypochlorite, or household bleach. The solution is made with 1 cup bleach to 1 gallon of water. This solution can be used on hard surfaces as well as carpets and rugs. To be effective the solution must remain on the surface for 15 minutes. For indoor or outdoor carpeting and rugs you must remove them from the home and place them on a flat area such as the carport or driveway. Hose both sides well to remove dirt and soil. Dump several buckets of the bleach solution on each side and scrub with a broom or hard bristled tool. Rinse both sides well, and remove as much water as possible with a wet/dry vacuum or another cleaner that will pull water. Allow the carpet or rug to dry thoroughly.

Whichever method you choose, always dry the area completely by opening all windows, using a heater, fan, or dehumidifier. This is very important, or the mold will just grow back. Remember to check for colorfastness in an inconspicuous area 24 hours before doing a complete clean.

It is a good idea to know what kind of flooring is under your carpet. If it is something that will be ruined by wetting the floor, even for a short time, you might want to reconsider or be very careful not to use very much water.

Materials, such as carpets and rugs, may have to be thrown away if they become too moldy. Mold grows in the spaces and crevices of porous materials and can keep growing back. It may be difficult, if not impossible to remove. Replacing carpet may be the only way that you can guarantee that mold will not still grow in the area.

Feel free contact us at if you have any further questions at : 443-961-2725


The post http://www.essortment.com-How to Remove Mold From Carpet appeared first on mold.

from mold http://moldremediationdr.com/remove-mold-carpet/
Mold Remediation Baltimore

Mold Removal Baltimore


Mold Remediation Pro’s are Certified mold removal Baltimore specialists as we tend to solely use the most effective equipment  within the mold removal business.

Wednesday, September 23, 2015

http://www.foxnews.com: Shows Health Concerns From Mold!


This article from Fox News Show how serious mold can affect someones health if the mold is not removed in areas of your home or business. In this example Mold was found in a hospital and potentially killed some patients. Here is a link to the story and below is the information on the story. http://www.foxnews.com/health/2015/09/22/pittsburgh-hospital-looks-for-mold-source-after-three-deaths/

Pittsburgh hospital looks for mold source after 3 deaths!

A Pittsburgh hospital is working to find and eradicate the source of a rare mold that may have contributed to the deaths of three transplant patients and left a fourth person in “guarded condition,” a hospital spokeswoman said on Monday.

Concern over mold at the University of Pittsburgh Medical Center Presbyterian flared in early September when mold was discovered in the cardiothoracic intensive care unit, forcing the hospital to move 18 patients.

On Thursday, mold-borne illness was discovered in a liver transplant patient who died at UPMC Montefiore, a second campus of the hospital with no connection to the cardiothoracic unit, the hospital’s website said.

The two patients who previously died stayed in the same hospital room in the cardiothoracic unit of UPMC Presbyterian at different times. The patient in guarded condition was also in that unit.

“As a precaution, we are putting all transplant patients in UPMC Presbyterian-Montefiore on a new anti-fungal medication even though there is no sign of infection in any of these patients,” Dr. Steven Shapiro, the hospital’s chief medical and scientific officer, wrote in a blog post.

The hospital performs hundreds of transplants a year.

So when you see mold do not hesitate to call us as from this article it can cause serious health problems if it is not treated correctly contact us at :443-961-2725  


The post http://www.foxnews.com: Shows Health Concerns From Mold! appeared first on mold.

from mold http://moldremediationdr.com/mold-deaths-in-hospitals/
Mold Remediation Baltimore

Tuesday, September 22, 2015

What Are Some Mold Remediation Techniques?

Here are some techniques you can use to remove mold from your house or business that may help you before the problem gets worse. We use some of these techniques to remove mold in homes and businesses. Below is article from: http://www.essortment.com/mold-remediation-techniques-46912.html

What are some mold remediation techniques? Mold expert Kevin Bristol discusses the complex process of completely removing and preventing mold in a building. If your home is contaminated with mold you will…

If your home is contaminated with mold you will want to remove it as soon as possible so that the members in your household won’t become sick. Mold can also ruin the structure of your home through decay and therefore removal is requisite. There are many different methods or techniques for mold remediation and removal depending upon the extent and type of problem you have.

Kevin Bristol is President of Advance Mold Remediation and is certified by the National Association of Mold professionals, International Association for Mold Professionals, and the Environmental Protection Agency. When he was asked what to look for in a mold removal company he explained, “As far as mold remediation, you have to be careful of fly by night companies that are not certified or just recently received their certification, but have no experience. There are a lot of companies that are entering the business to make a quick dollar and really don’t know what they are doing.”



Bristol uses many different techniques to remove mold. Some have been around for awhile and others are new and unique. “The technique that we normally use is getting rid of the water source and removing the contaminated area. If it’s a cellulose material like drywall or insulation we would totally remove it. We go in, we take out the material, then [replace it with new mold resistant material]” explains Bristol. This process is done if the mold has grown into the drywall, carpeting, and ceiling or anywhere in the home.

If the mold is on the surface of cement or wood structure and you can’t remove it Bristol and most companies use the following technique to scrape from the surface. “Hyper-sanding, or high efficiency air particle sanding, is used on the contaminated studs after you have taken down the drywall. We sand them first and once they are sanded we come back and treat it with a biocide or other chemicals. These are biocides that basically kill off molds, bacteria, or other pathogens. Then we normally hyper-vacuum the surface and floor area to remove any spores that may have fallen to the ground. We wipe down all the walls with an antifungal solution to make sure that the mold spores that were released are now eliminated and of course we put in the negative air machine and air scrubbers. A negative air machine basically is a machine that filters out contaminated air and is exhausted outside through a flexed tube. Then we put in an air scrubber that actually takes the air and exchanges it several times per hour. From there we also do what they call biocide fogging. The fog actually eliminates the airborne mold spores so that once they’re eliminated in the air they fall to the ground and then we use a wet mop technique to finally get up all the mold spores and everything else. Of course, if its carpet that we are dealing with, we put down 6 mil poly on the floor to make sure that anything that falls while we are doing remediation falls on the actual polyethylene and we contain that area away from the rest of the home.” This technique can be modified to do yourself if the area of mold is small. Barricade the room off by plastic so the mold spores won’t float into other areas of the house. Clean the mold off by sanding or wiping. Spray with a mold or mildew cleaner. Clean all of the walls and flooring. Open the windows and doors to let fresh air in.

There is a new technique called dry ice blasting. According to Bristol, “Dry ice blasting is really revolutionizing the mold industry. We just go in and wire brush contaminated wood, then we use a dry ice blaster that actually uses ice pellets. When the ice pellets come out of the nozzle they turn into a CO2 gas.” The Co2 gas kills the mold and removes it from the surface immediately.

Whatever method you use make sure you protect yourself with face masks and gloves when cleaning it up. OSHA or the Occupational, Safety and Health Act says this about mold, “As a general rule, simply killing the mold, for example, with biocide is not enough. The mold must be removed.” Remember this in any remediation method you choose.

If you feel your are not comfortable using these methods I highly recommend getting in contact with us at: 443-961-2725


The post What Are Some Mold Remediation Techniques? appeared first on mold.

from mold http://moldremediationdr.com/mold-remediation-techniques-baltimore/
Mold Remediation Baltimore

Monday, September 21, 2015

When Should I Seek A Mold Inspector?

Here is a great article about when you should seek a mold inspector before your problems get worse in your home or business. Check out the article at: http://www.essortment.com/should-seek-mold-inspector-46900.html

When should I seek a mold inspector? You should call a mold inspector if you smell or suspect mold. You will also want to have a mold inspection if you are buying or selling a home. If your home is contaminated…

If your home is contaminated with mold you will want to have it removed as soon as possible so that the members in your household won’t become sick. Mold can also ruin the structure of your home through decay and cause damage to the home. Calling a professional mold inspector or mold remediation specialist will depend on what type and how large of an area the mold has infected.
It is important to stop mold from growing because a myriad of health problems can result when you breathe in the spores from a mold infestation. These health problems can range from mild to severe. Mild health problems are sneezing, itchy watery eyes, and headaches. Severe health problems can be asthma or severe breathing problems, fatigue, learning disabilities, bloody nose, spots on your lungs, and pulmonary hemorrhage in infants.
Call in a professional mold inspector if you suspect any of the above health problems are linked to mold exposure. If you try to clean up toxic mold by yourself you may become ill. If the area that is moldy is larger than a 10 x 10 area you will need to call a mold remediation specialist. If you suspect the mold to be toxic black mold, which is dark, black and slimy, call in a professional mold inspector. He can take a sample of the mold and send it in to an independent lab to determine what type of mold you have. It is common to have a small amount of mold in bathrooms and kitchens. This type of mold can usually be cleaned and contained by weekly cleaning with bleach and water. If the mold problem is advanced definitely call a specialist.

Kevin Bristol is President of Advance Mold Remediation and is certified by the National Association of Mold professionals, International Association for Mold Professionals, and the Environmental Protection Agency. When he was asked what to look for in a mold removal company he explained, “As far as mold remediation, you have to be careful of fly by night companies that are not certified or just recently received their certification, but have no experience. There are a lot of companies that are entering the business to make a quick dollar and really don’t know what they are doing.”

When you are looking for a new home be especially careful in purchasing a home wher you may suspect mold. “You will want to have a mold inspection if you are buying or selling a home” and if you see or smell mold in the home states Bristol. Some states require past mold infestations to be disclosed on the seller home disclosure statement but other do not. Buyer beware of purchasing a house with hidden mold. “A mold inspector will check all areas for mold: toilet spaces, attics, basements, bathrooms. If you are buying a house, you want to make sure that the air quality is healthy and that there are no issues as far as moisture is concerned. A mold inspector will be able to tell you all that because they have equipment such as photometers, hydrometers, and the skills to check inside wall cavities to make sure everything is okay” explains Bristol.

So do not wait until someone gets sick contact us at 443-961-2725  and we will get a mold specialist to evaluate a mold remediation plan for your home or business.

The post When Should I Seek A Mold Inspector? appeared first on mold.

from mold http://moldremediationdr.com/when-should-i-seek-a-mold-inspector/
Mold Remediation Baltimore

Friday, September 18, 2015

http://www.essortment.com/black-mold-46777.html What is black Mold?

We have many clients ask us what is Black Mold? Below from http://www.essortment.com/black-mold-46777.html will explain how serious Black mold can be to your health and what should be done to correct the problem quick and safe.

What Is Black Mold?

Black Mold” is a term commonly used to describe a slimy, greenish-black substance which can result in serious health risk. This infamous mold is also known as Strachybotrys chartarum and more often as Strachybotrys atra. It has been closely linked to the death of babies from respiratory bleeding, and as a contributing factor to illnesses such as asthma and bronchitis. According to the CDC(Center of Disease Control), this mold is responsible for over “100 cases of lung disorders”.


Virtually everyone has one type or another of mold somewhere in their home. Although not all types are toxic, it is sometimes difficult to distinguish types without lab testing. Thus it is imperative to treat and remove all molds as if they’re potentially harmful. Regardless of the type of mold found, a home containing mold is not essentially a healthy home.

Mold spores are very easily transported to different areas by attaching themselves to various hosts. These hosts would include people, animals, shoes and they even enter through open windows and doors. The spores then thrive and grow where it is damp and moist. Very toxic molds can develop from water seepage, and while black mold is “less common than other mold species it is not rare”.

Areas and substances where black mold can be found include water soaked wood, ceiling tiles, wall paneling, cardboard, even items made of cotton. Black mold can grow on drywall and insulation and can infest areas in the floors, walls and ceilings.

Moisture is essential to the growth of black mold, and when it is wet it is shiny in appearance. If you were to physically touch a spot of black mold, it would feel slimy and would smear on the area.

When you are contemplating clean up of black mold, you need to verify the extent of the problem. Many of the infested areas will be relatively small and be a result of small leaks or plumbing problems. After discovering the root of the problem and rectifying it, you can disinfect the area with bleach. A mixture of one cup bleach to a gallon of water is sufficient to disinfect the area. Apparently adding a touch of dish soap to the mixture will also aid in dissolving accumulated grease and dirt in the area.

You are to apply the bleach mixture to the moldy area and leave it to saturate the area for approximately fifteen minutes. After this you must take care to thoroughly dry the cleaned area.

Spores from dried mold are very dangerous and should be cleaned with caution. You should never scrape or scratch at dried mold as the spores would then be released into the air and pose an inhalation risk. A respiratory mask and eye protection are necessary and adequate clothing to prevent skin contact is recommended.

If the problem is more internal such as on insulation or throughout a carpet, the only solution is to remove and replace the items. As well an infested area of over 2ft is considered a “heavily infested” area and professional help should be consulted. Mold problems resulting from flooding should also be managed professionally to avoid possible health risk.

According to the CDC, there are some preventative measures you can personally take to battle black mold. The following are some of their suggestions; keep the humidity of the house down, make sure there is adequate ventilation inside the home(especially in the kitchen and bathroom), add mold inhibitors to new paint before painting, use mold killing products to clean and do not use carpet in the bathroom.

Black mold issues are something everyone should be aware of and know how to combat. Search through any news source and you will see that toxic mold is a common cause for school closings. If the school board will go through such measures to eradicate the problem then we should be just as cautious. It is also important to remember that like all other types of fungus, there are some people who may be more sensitive to the effects of black mold. People who have allergies, respiratory disease or any type of immune suppressing disease should be especially wary of this toxic mold.

Do not procrastinate when is comes to Black Mold and contact us at 443-961-2725 


The post http://www.essortment.com/black-mold-46777.html What is black Mold? appeared first on mold.

from mold http://moldremediationdr.com/httpwww-essortment-comblack-mold-46777-html-what-is-black-mold/
Mold Remediation Baltimore

Thursday, September 17, 2015

Daners of Mold in your home

The dangers of mold in your home! 


How To Get that Mold out of your clothes

Mold Clothes Baltimore

There are several ways to remove mold out of clothes. We highly recommend getting the mold out of your clothes as it will cause many health problems. Here is a article from http://blackmold.awardspace.com/black-mold-clothes.html

Products to Remove Mold from Clothes

There are quite a few solutions you can wash moldy clothes in to get rid of the mold. Some good ones include:


Tips for Removing Mold from Clothes

There are a few general tips when it comes to removing mold from clothes. One is that it’s best to wash your clothes in hot water. Hot water kills mold more effectively than cold water and better removes mold spores and allergens too. Of course make sure you don’t use water so hot that it can damage your clothing.

When you’re washing your clothes with a mold killing solution it’s best to wash them through at least two full cycles. Then after your clothes have been washed hang them on the line in the sun. The heat from the sun and the sun’s ultraviolet light help to kill mold. The sun has a natural bleaching effect that can also help to fade mold stains.

How to Remove Mold from Clothes with Bleach

Washing clothes in a solution of bleach and water can kill mold. Bleach can also fade away stains left on clothes by mold.

Before you use bleach make sure to check your clothes for any “do not bleach” warnings. You might also want to do a spot test on your clothes after you’ve mixed the bleach and water solution just to make sure they won’t fade.

Another option, instead of mixing your own bleach and water solution, is to wash your clothes with a bleaching detergent such as Clorox or Oxiclean.

How to wash your clothes with bleach:

  1. Start by putting your clothes into the washing machine and adding laundry detergent.
  2. Once the washing machine has filled up with water add about a cup of bleach (or whatever amount the label on the bleach says to use).
  3. Let your washing machine run like normal.
  4. If you notice the colors fading at any stage remove your clothes and rinse them well.

Alternatively you can soak your clothes in bleach:

  1. Use a concentration of about half a cup of bleach per gallon of water, or whatever ratio it says on the bleach’s label.
  2. Let the clothes soak in the solution for a few hours, making sure the colors do not fade.
  3. After soaking the clothes wash them in your washing machine with laundry detergent like you usually would.


How to Remove Mold from Clothes with Borax

Borax is a natural mold killer which does not emit toxic fumes. To kill mold on clothes with borax you can either purchase borax laundry detergent or add borax powder yourself to your washing. Mix the borax with hot water before adding it to your washing to make sure it is completely dissolved.

How to wash clothes using borax:

  1. Add your clothes to the washing machine along with laundry detergent.
  2. Dissolve half a cup of borax in very hot water.
  3. Once the washing machine has filled up add the borax that you dissolved in hot water.
  4. Let the washing machine run through like normal.


How to Remove Mold from Clothes with Vinegar

Vinegar kills 82% of mold species and can usually kill the mold growing on clothes. Vinegar will also remove the moldy smell from the clothes.

How to wash your clothes with vinegar:

  1. To kill mold on your clothes using vinegar, put your clothes in the washing machine along with detergent and let the machine fill with water.
  2. Then add about a cup or two of vinegar to your washing.
  3. Let the washing machine run through its cycle as normal.

Alternatively, soak clothes in vinegar:

  1. Let your clothes soak in a solution of one cup of white vinegar in a bucket of water for about an hour.
  2. After soaking, wash the clothes with laundry detergent in your washing machine to wash away the mold and vinegar.
  3. You might need to repeat the process to remove all the traces of mold and any moldy smell from your clothes.


How to Prevent Mold on Clothes

If you have mold growing on your clothes it’s probably because you left them in a damp pile for a few days or more. Every time you wash your clothes you should hang them on the line or dry them in the drier as soon as you can. Clothes that have been washed and then left wet for a day or more are at risk of mold starting to grow on them.

The same applies for clothes that have gotten sweaty or wet from you wearing them. Don’t throw wet clothes in the hamper where they’ll sit for days until you do the washing. Hang sweaty clothes somewhere where they can air out first. Do the same for wet swimming gear. Towels should also be hung up to dry after they’ve been used. If you have sweaty shoes you might also want to let them air outside on the doorstep or some other place before putting them away.

Not only might mold grow on wet clothes but moisture from the clothing can really increase the humidity in your home which can lead to mold growth in your house. Another related tip is to vent the clothes drier outside or at least ventilate the room where the drier is so that the moisture from drying clothes doesn’t get released into the air in your house.

For more ways to prevent mold growing in your home visit Prevent Mold.

Symptoms and Effects of Mold on Clothes

If you find mold on your clothes you should remove it as soon as possible. One reason to clean away mold and a sign that you might have mold on your clothes is the symptoms it can cause. If you’re wearing clothes with mold on them you may feel itchiness where the mold is contacting your skin and develop a rash. The clothing might also make you sneeze when you wear it.

Another reason to remove mold from clothes quickly is the damage it can do to your clothing. Mold digests whatever material it’s growing on so long term mold growth will destroy clothing. As mold grows larger it will also leave a greater stain on your clothing which can be difficult to remove and the clothes will smell.

Finally, mold on clothes releases mold spores into the air of your home which can promote mold growing inside. Additionally a build up of spores in your home’s air can cause you to suffer allergic symptoms while you are inside your house such as sneezing and sore eyes.

For more about the symptoms mold can cause see Mold Symptoms.


So do not hesitate to contact us if you experience more problems with mold in your house. Call 443-961-2725 or check us out on the web at: http://www.moldremediationdr.com

The post How To Get that Mold out of your clothes appeared first on mold.

from mold http://moldremediationdr.com/get-mold-out-of-your-clothes/
Mold Remediation Baltimore